|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-07-2011, 03:24 PM
|
#1 |
|
G8 Club Founding Member
Join Date: Sep 2010
Location: Middle of Virginia, USA
Posts: 4,265
|
1991 G8 re-furb'd
Well, here it is. Three months and countless hours sitting on buggies gone wild,,,,I mean, building this golf cart!
 Thought I'd post some before and after pictures. I say, its almost done, but not yet. The family says, 'its done dad'. The wife says 'your DONE honey!'. This cart had one foot in the grave. It was not running and it was so close to heading to the junkyard. I picked it up for $390.00. Just about every single part was either re-built or replaced. I must say, what a FUN project this has been.  Thanks to all those who have helped me out along the way on this forum. There's no way I could have figured all this out without you guys! Especially cudo's to Mike!! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-07-2011, 03:43 PM
|
#2 |
|
G8 Club Founding Member
Join Date: Sep 2010
Location: Middle of Virginia, USA
Posts: 4,265
|
Re: 1991 G8 re-furb'd
And here's the finished pictures.
|
|
|
|
|
03-08-2011, 12:03 AM
|
#3 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: 1991 G8 re-furb'd
Looks Good Jim, just tune the bugs out of it and it will be fine! Put some miles on it, and maybe wheels and tires later on. You did a darn good job!!
Now enjoy! |
|
|
|
|
03-08-2011, 05:04 AM
|
#4 |
|
Gone Wild
Join Date: Mar 2010
Location: Eminence, IN
Posts: 534
|
Re: 1991 G8 re-furb'd
Looks good...i really like that rear seat also. I have been thinking about building one like that for mine
|
|
|
|
|
03-08-2011, 06:19 AM
|
#5 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,045
|
Re: 1991 G8 re-furb'd
Nice work!! Looks great
 |
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
03-08-2011, 07:18 PM
|
#6 |
|
Not Yet Wild
Join Date: Feb 2011
Location: indiana
Posts: 61
|
Re: 1991 G8 re-furb'd
Very nice. I hope my paint job turns out that nice. I haven't decided on a color but that electric blue is sharp!!
I have been working all my bugs out before I work on the body. What kind of paint did you use? The mix? THis plastice is so flexible I am worried about cracking. The last guy that had my cart did a rattle can black and it looks rough. cracked all over. I have a lot of prep work to do. |
|
|
|
|
03-08-2011, 08:01 PM
|
#7 |
|
G8 Club Founding Member
Join Date: Sep 2010
Location: Middle of Virginia, USA
Posts: 4,265
|
Re: 1991 G8 re-furb'd
Thanks guys!
Chevy man, go to the sticky here: http://www.buggiesgonewild.com/body-...ic-bodies.html It'll tell you everything you need to know about painting these carts! I used all Nason products from an automotive paint store. Expect to pay at least $200. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ez go 1991 | Golf Carts and Parts | |||
| 1991 G9 | Gas Yamaha | |||
| 1991 Ez Go | Electric Club Car | |||
| 1991 gas ezgo | Gas EZGO | |||
| My 1991 G9 | Gas Yamaha | |||
Linear Mode
