|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-15-2015, 03:13 PM | #1 |
Not Yet Wild
Join Date: May 2014
Posts: 25
|
want to put a club car dc cord on an ezgo powerwise charger
I want to put a club car crows foot plug cord on an EZGO charger. The club car does not have an OBC. The EZGO powerwise charger cord has 3 wires but the club car cord only has two wires. Do I just hook up the two wires and ignore the red wire going to the board? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-16-2015, 03:53 PM | #2 |
Not Yet Wild
Join Date: May 2014
Posts: 25
|
Re: want to put a club car dc cord on an ezgo powerwise charger
I got it figured out and working. The black wire going to the circuit board that was attached to the red wire on the dc power cord has to connected to black wire in the dc power cord. I put it in the same ring terminal that attaches the black (negative) wire in the dc cord to the transformer. It is charging fine.
|
01-16-2015, 07:29 PM | #3 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,239
|
Re: want to put a club car dc cord on an ezgo powerwise charger
glad you got it figured out
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Changing out cord on Powerwise Charger | Electric EZGO | |||
changing dc cord powerwise charger. | Electric EZGO | |||
Powerwise charger w/ Club Car round three prong charger plug HOT!! | Electric EZGO | |||
CLub Car 48v Charger 4 sale/WTB DC cord | Golf Carts and Parts | |||
Powerwise ezgo charger | Electric EZGO |