09-21-2017, 12:51 PM | #21 |
Not Yet Wild
Join Date: Mar 2017
Posts: 16
|
Re: solenoid
jumped it still no go
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2017, 07:20 PM | #22 |
Gone Wild
Join Date: Jan 2016
Location: FL
Posts: 1,067
|
Re: solenoid
Ok you should check out the f/r switch carefully next
|
09-22-2017, 03:38 AM | #23 |
Not Yet Wild
Join Date: Mar 2017
Posts: 16
|
Re: solenoid
did all working fine replaced the micro switch
|
09-22-2017, 07:46 AM | #24 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: solenoid
The pedal micro switch is either broken and stuck closed, or someone has bypassed it causing the solenoid to click with the key. That shouldn't cause the no go. If you've have checked all the above, look in the stickies and follow the controller diagnostic procedures which will test the throttle and controller. Also make sure you check the cables all the way to the motor.
Sent from my SM-G930R4 using Tapatalk |
09-23-2017, 05:26 AM | #25 |
Not Yet Wild
Join Date: Mar 2017
Posts: 16
|
Re: solenoid
I did all that I ordered a controller and the cost was not as bad as I thaught $ 320.00 canadian
|
09-23-2017, 03:59 PM | #26 |
Gone Wild
Join Date: Jan 2016
Location: FL
Posts: 1,067
|
Re: solenoid
|
09-28-2017, 06:01 AM | #27 |
Not Yet Wild
Join Date: Jul 2017
Location: culiacan mexico
Posts: 34
|
Re: solenoid
Change the microswith its under the matfloor.
Remove the matfloor. Youll see a box remove that to And there is the micro swith. Every time you select forward or reverse it has to cut the power on the solenoid. Enviado desde mi SGH-I337M mediante Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
E-Z-GO RXV Solenoid - 48 Volt Solenoid to Replace 36 Volt Solenoid... | Electric EZGO | |||
96 club car ds solenoid wont click and cart wont move unless you jump solenoid | Electric Club Car | |||
Solenoid not engaging with Forward / Reverse switch? (Solenoid is good) | Electric EZGO | |||
EZ-GO Txt 48v with AXE - No solenoid Click - New Solenoid | Electric EZGO | |||
Help converting G1 solenoid setup to single G16 solenoid | Gas Yamaha |