|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-28-2011, 05:37 PM | #1 |
Not Yet Wild
Join Date: Apr 2009
Posts: 37
|
Cable Upgrade
I am getting ready to order welding cable for my 96 DCS with a 500 amp controler and lights. I was going to order #2 cable but then was thinking should I order #1. Any advantage of #1 over #2 ? Thanks Brian
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-28-2011, 06:15 PM | #2 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Cable Upgrade
#4 cable is usually enough and #2 is even better. Anything larger than that is a b*tch to work with.
A 500 amp controller on a DCS motor makes me a little nervous, I would contemplate a makeover of the motor by Plum Quick. http://www.plumquick.com/ |
08-28-2011, 06:49 PM | #3 |
Not Yet Wild
Join Date: Apr 2009
Posts: 37
|
Re: Cable Upgrade
Thanks For The info #2 it is Brian
|
08-28-2011, 06:56 PM | #4 |
Not Yet Wild
Join Date: Apr 2009
Posts: 37
|
Re: Cable Upgrade
Just went out to my shop, WHAT WAS I THINKING! I have a DCX 400 controler. So its a 400 amp controler. Sorry for the confusion. Brian
|
08-28-2011, 07:07 PM | #5 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Cable Upgrade
Cool, I think you're good to go with #2.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
08' Precedennt no go after cable upgrade | Electric Club Car | |||
ez-go pds cable upgrade | Electric EZGO | |||
Cable upgrade | Electric Club Car | |||
Medalist Cable Set Upgrade. | Electric EZGO | |||
Cable upgrade | Electric Club Car |