lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-08-2012, 09:38 PM   #1
steven1203
Not Yet Wild
 
Join Date: Aug 2012
Posts: 3
Default Wiring Harness Help

I was installing a new dash & radio on my rxv and I drilled through the wiring harness. Didn't even know it was in a chanel up the center of the cart. I have spliced all wires back together and hooked up my batteries. I have power, but the cart is not moving..the reverse beep doesn't even work.

Have I shorted something, does this have to be reprogrammed...HELP!

Thanks!
steven1203 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-09-2012, 12:01 AM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
Default Re: Wiring Harness Help

Ouch. That's a tough one. What year RXV? Can you post a diagram of the cart wiring?
scottyb is offline   Reply With Quote
Old 08-09-2012, 06:32 AM   #3
TheAspec
Gone Wild
 
TheAspec's Avatar
 
Join Date: May 2011
Location: Georgia
Posts: 168
Default Re: Wiring Harness Help

Quote:
Originally Posted by steven1203 View Post
I was installing a new dash & radio on my rxv and I drilled through the wiring harness. Didn't even know it was in a chanel up the center of the cart. I have spliced all wires back together and hooked up my batteries. I have power, but the cart is not moving..the reverse beep doesn't even work.

Have I shorted something, does this have to be reprogrammed...HELP!

Thanks!
Is the run plug inserted? Without it the cart will not do anything. The plug is a molex connector under the cup holders.
TheAspec is offline   Reply With Quote
Old 08-09-2012, 07:01 AM   #4
steven1203
Not Yet Wild
 
Join Date: Aug 2012
Posts: 3
Default Re: Wiring Harness Help

2009 Rxv-
Thanks!
steven1203 is offline   Reply With Quote
Old 08-09-2012, 07:03 AM   #5
steven1203
Not Yet Wild
 
Join Date: Aug 2012
Posts: 3
Default Re: Wiring Harness Help

The run plug is hooked up....wonder if I wiped out the computer programming?
Thanks
steven1203 is offline   Reply With Quote
Old 08-09-2012, 07:49 AM   #6
TheAspec
Gone Wild
 
TheAspec's Avatar
 
Join Date: May 2011
Location: Georgia
Posts: 168
Default Re: Wiring Harness Help

How do you know it has power? Take a DMM and check to see it you have voltage (key must be in either R-N-F, not off) at either the run plug (with it still connected) or the acc. harness plug used for the SOC meter. The run plug voltage will be 5 volts, and depending which wire you check on the SOC connection you will have 5 volts, or ~48 volts (depending on pack voltage). If this checks out, sounds like you need a dealer with the handheld diagnostic tool to connect and check the error code.
TheAspec is offline   Reply With Quote
Reply

Tags
wiring
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO




Similar Threads
Thread Forum
DIY Wiring Harness Electric Club Car
Need a Wiring Harness for a G9 Gas Yamaha
g 16a wiring harness Gas Yamaha
New Wiring Harness Gas Club Car
wiring harness id, PLEASE HELP Electric EZGO


All times are GMT -5. The time now is 05:49 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.