|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
Thread Tools | Display Modes |
11-06-2018, 09:05 PM
|
#1 |
|
Getting Wild
Join Date: Apr 2009
Location: The Ville
Posts: 81
|
How to pull/remove G1 engine?
I have an 81 gas G1 that I want to remove the engine so I can clean everything up as well as replace the seals and wiring. The carb and cables are already disconnected. Looks like exhaust, belts and wiring are all that's left to unhook. I saw a picture earlier of a frame with no engine. It looks like 4 bolts facing up connected to the frame, 2 in front, 2 in back. I'll have to find them under all the nastiness and take the nuts off from the top and lift the engine out? Thanks for any help.
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Pull behind bar? | Design Center | |||
| Best way to pull engine on G16? | Gas Yamaha | |||
| How do I remove the head from robin engine | Gas EZGO | |||
| 1984 Ez-go remove clutch engine still in? | Gas EZGO | |||
Threaded Mode