|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-21-2018, 10:03 AM | #1 |
Not Yet Wild
Join Date: May 2016
Location: PA
Posts: 22
|
Axle bearing replacement
Getting ready to start attempting to replace the right rear axle housing bearing on a 2008 G29. Do I need any special tools and can this be done with the housing still in the cart.? Any help/advice is greatly appreciated. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-22-2018, 08:21 AM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Axle bearing replacement
Straight forward if you have a really good set of snap ring pliers.
|
07-22-2018, 11:07 AM | #3 |
Not Yet Wild
Join Date: May 2016
Location: PA
Posts: 22
|
Re: Axle bearing replacement
I’m at the point of trying to get the bearing out. I have it soaked with PB blaster but I think it may be seized to the housing or axle and I’m having a hell of a time finding a puller that will work. My only other option may be heat or hammer and chisel to bring it out in pieces.
|
07-22-2018, 11:38 AM | #4 |
Gone Wild
Join Date: Jun 2016
Posts: 623
|
Re: Axle bearing replacement
I replaced both sides about 2 years ago. I just remember yanking them out.
|
07-22-2018, 01:45 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Axle bearing replacement
After snap ring is removed and some PB blaster, reinstall the hub, hit the hub with a hammer to help pull it out.
|
07-22-2018, 02:04 PM | #6 |
Not Yet Wild
Join Date: May 2016
Location: PA
Posts: 22
|
Re: Axle bearing replacement
Thanks guys it’s done. The bearing was so bad the inside stayed on the axle and the outside stayed in the housing. Had to use a grinder on the half on the axle and a slide hammer on the other half. It’s up and running with no noise or vibrations which make for a happy mother in law. It’s nice she pays me in beer
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
axle bearing and seal replacement. | Electric EZGO | |||
1989 G1 Rear axle bearing replacement | Gas Yamaha | |||
rear axle bearing replacement | Electric EZGO | |||
G2 Axle Bearing Replacement | Gas Yamaha | |||
Axle Assembly - Bearing Replacement | Electric EZGO |