Xct500

scottyb · 08-20-2015, 01:36 PM

Quote:

Originally Posted by jhnmflr

Sorry the map is the Scotty special.

LOL - secret soup

JohnnieB · 08-20-2015, 01:58 PM

Quote:

Originally Posted by scottyb

LOL - secret soup

I hope you keep your secret soup recipes on a secured server.

scottyb · 08-20-2015, 02:03 PM

Only shop dog knows the recipe

JohnnieB · 08-20-2015, 02:16 PM

I'll have to see if I can tune in to his brainwaves via our tinfoil hats.

---------
I'll have to try later, SWMBO wants me to take her out to lunch.

scottyb · 08-20-2015, 04:01 PM

Quote:

Originally Posted by JohnnieB

I'll have to see if I can tune in to his brainwaves via our tinfoil hats.

---------
I'll have to try later, SWMBO wants me to take her out to lunch.

Order something to go ........ wrapped in tin foil. You may need it

jhnmflr · 08-20-2015, 04:50 PM

Now that is funny!
But I have to say that the torque curve is awesome!!!!!!!!!!!!!!!!

Fastest1 · 08-20-2015, 09:46 PM

I just installed my XCT 48400 yesterday too. I had a few challenges also. I made it around the block just fine. I then burnt up my run/tow switch. That took a few tests to sort. It helps to become familiar with your equipment anyway.

I am going to reserve my opinion just yet. During the failure I made a few controller setting changes trying to resolve the problem. I will have to get another copy of the special sauce. However I did run around today connected to the laptop monitoring various data while watching my GPS. It was interesting tampering with the various settings and curves. Plenty to read about and learn there. I am running at 36v presently and intend to bump it to 42v. Not much interest in 48v ATM.

scottyb · 08-20-2015, 11:12 PM

Quote:

Originally Posted by Fastest1

I just installed my XCT 48400 yesterday too. I had a few challenges also. I made it around the block just fine. I then burnt up my run/tow switch. That took a few tests to sort. It helps to become familiar with your equipment anyway.

I am going to reserve my opinion just yet. During the failure I made a few controller setting changes trying to resolve the problem. I will have to get another copy of the special sauce. However I did run around today connected to the laptop monitoring various data while watching my GPS. It was interesting tampering with the various settings and curves. Plenty to read about and learn there. I am running at 36v presently and intend to bump it to 42v. Not much interest in 48v ATM.

Are we really going to talk 36v and performance in the same post?

Fastest1 · 08-21-2015, 06:29 AM

I wanted to use 220 but my extension cord kept getting ripped out of the wall!

jhnmflr · 08-22-2015, 02:06 PM

okay so been real busy but got a chance to play today. My tire diameter off of cart is 24.5". I unplugged cart and it sat for about 20 minutes. I forgot to check voltage. My top speed with a helper neighbor was 29.06. The average I came up with after a few full speed runs was 28.45. At 28.45 the motor speed was 5140. I can live with that. I can say also that my tires are A/T with a 20 psi max and they are set @ 28 psi. Gotta say very pleased........ what ya got Johhny? Would be nice to pull a little more rpm and hit 30mph. Any thoughts? Chime in Scotty! Oh and why does the controller temp have to be in Celsius, I'm old school need F.

08-20-2015, 02:16 PM	#14
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: Xct500 I'll have to see if I can tune in to his brainwaves via our tinfoil hats. --------- I'll have to try later, SWMBO wants me to take her out to lunch.

08-20-2015, 04:50 PM	#16
jhnmflr Gone Wild Join Date: Jul 2012 Location: Sw Florida Posts: 298	Re: Xct500 Now that is funny! But I have to say that the torque curve is awesome!!!!!!!!!!!!!!!!

08-20-2015, 09:46 PM	#17
Fastest1 Getting Wild Join Date: Aug 2015 Location: Conroe/Woodlands, TX Posts: 133	Re: Xct500 I just installed my XCT 48400 yesterday too. I had a few challenges also. I made it around the block just fine. I then burnt up my run/tow switch. That took a few tests to sort. It helps to become familiar with your equipment anyway. I am going to reserve my opinion just yet. During the failure I made a few controller setting changes trying to resolve the problem. I will have to get another copy of the special sauce. However I did run around today connected to the laptop monitoring various data while watching my GPS. It was interesting tampering with the various settings and curves. Plenty to read about and learn there. I am running at 36v presently and intend to bump it to 42v. Not much interest in 48v ATM.

08-22-2015, 02:06 PM	#20
jhnmflr Gone Wild Join Date: Jul 2012 Location: Sw Florida Posts: 298	Re: Xct500 okay so been real busy but got a chance to play today. My tire diameter off of cart is 24.5". I unplugged cart and it sat for about 20 minutes. I forgot to check voltage. My top speed with a helper neighbor was 29.06. The average I came up with after a few full speed runs was 28.45. At 28.45 the motor speed was 5140. I can live with that. I can say also that my tires are A/T with a 20 psi max and they are set @ 28 psi. Gotta say very pleased........ what ya got Johhny? Would be nice to pull a little more rpm and hit 30mph. Any thoughts? Chime in Scotty! Oh and why does the controller temp have to be in Celsius, I'm old school need F.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-21-2015, 06:29 AM	#19
Fastest1 Getting Wild Join Date: Aug 2015 Location: Conroe/Woodlands, TX Posts: 133	I wanted to use 220 but my extension cord kept getting ripped out of the wall!