Making Both Rear Wheels Pull?

duurmeehr · 12-22-2015, 07:15 PM

I need some more rear traction out of my cart. What would it take to get that out of my differential? Maybe limited slip or positive traction. I am not sure the manufacturer of the actual rear end but it doesn't look like the Eaton or Dana to me. Is it possible an EZGo proprietary system back in 1986?

Anybody have any suggestions or can you point me to an expert???

Helirich · 12-22-2015, 08:16 PM

Ive seen limited slips for sale. But the price was rediculas. Might be cheaper to make a left and right brakes.

Revolution · 12-22-2015, 10:08 PM

https://shop.ezgo.com/products/Limit...ntial-Kit.html

Ezgo sells the one above for $360, you can find them a little cheaper from other dealers. The bad news is I don't think it will fit your axle.

The other kits you see are junk and wear out fast, the Ezgo one is the real deal, if it will fit your axle.

I am ordering two at some point for my big cart one for the front and one for the rear.

Revolution · 12-22-2015, 10:10 PM

I just checked again they are for 1997-2009 axles.

If you want it bad, you might be able to swap to a newer axle that would fit the limited slip kit.

rib33024 · 12-23-2015, 11:43 AM

This looks like the rear you have, this was not a common rear end. This is like the gas rear, with a electric motor connected to it

This is a Marathon motor, and this is the rear it fits on in the pic below, looks just like your motor

12-22-2015, 08:16 PM	#2
Helirich Gone Wild Join Date: Sep 2015 Posts: 572	Re: Making Both Rear Wheels Pull? Ive seen limited slips for sale. But the price was rediculas. Might be cheaper to make a left and right brakes.
Helirich Gone Wild Join Date: Sep 2015 Posts: 572

12-22-2015, 10:08 PM	#3
Revolution Voltaholic Join Date: Dec 2013 Location: Close to Navasota Texas Posts: 934	Re: Making Both Rear Wheels Pull? https://shop.ezgo.com/products/Limit...ntial-Kit.html Ezgo sells the one above for $360, you can find them a little cheaper from other dealers. The bad news is I don't think it will fit your axle. The other kits you see are junk and wear out fast, the Ezgo one is the real deal, if it will fit your axle. I am ordering two at some point for my big cart one for the front and one for the rear.

12-22-2015, 10:10 PM	#4
Revolution Voltaholic Join Date: Dec 2013 Location: Close to Navasota Texas Posts: 934	Re: Making Both Rear Wheels Pull? I just checked again they are for 1997-2009 axles. If you want it bad, you might be able to swap to a newer axle that would fit the limited slip kit.

12-23-2015, 11:43 AM	#5
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: Making Both Rear Wheels Pull? This looks like the rear you have, this was not a common rear end. This is like the gas rear, with a electric motor connected to it This is a Marathon motor, and this is the rear it fits on in the pic below, looks just like your motor

Similar Threads
Thread	Forum
st 4x4 rear wheels will not lock	Gas EZGO
just got my new solenoid, and front wheels only pull	Electric EZGO
Ok My Buddies cart will only pull with front wheels Not back	Electric EZGO
Rear Seat Mod...Making a good product better)	Gas Yamaha
Rear end making noise	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum