Upgrading battery warning light on 2013 predent.

[Sergio]

Look near the key switch.

There is a Red wire with quick terminal that is the positive from Tow/Run switch.

There is a black/yellow wire with quick terminal that is the negative for the meter.

If You want the meter to only be ON when the Key Switch is ON, connect the meter positive wire to the same post on the Key switch where the Blue wire is connected.

Make sure You disconnect the pack negative battery cable before removing the dash to avoid a short.

[sandbuggy]

Originally Posted by Sergio

Look near the key switch.

There is a Red wire with quick terminal that is the positive from Tow/Run switch.

There is a black/yellow wire with quick terminal that is the negative for the meter.

If You want the meter to only be ON when the Key Switch is ON, connect the meter positive wire to the same post on the Key switch where the Blue wire is connected.

Make sure You disconnect the pack negative battery cable before removing the dash to avoid a short.

Thank you Sergio, will take look at this. If doesn't look similar I'll post picture of what I have, cheers

Sent from my SM-G930F using Tapatalk