![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Oct 2007
Posts: 10
|
![]() I need some help on replacing the electric motor bearings on my 94 Marathon. After being partially submerged from hurricane Ike, the motor runs, but the bearings are growling. I would like to replace them but can't find any threads here describing the process. I can get the motor off but am hesitant to break the motor apart before I know how to reassemble the motor. My main concern is how to get the brushes back in. The motor is a D&D so I am assuming that the bearings are the same as the stock G.E. it came with. I also would like to know if I will need a press to remove/install the bearings. Any advice is much appreciated.
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Golf Cart Photographer
![]() Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
![]() Hello lupin36 and Welcome to the forum.
Someone should be along anytime to help. |
![]() |
![]() |
![]() |
#3 |
doin it in the desert
![]() ![]() Join Date: Dec 2008
Location: Sonora Desert,Az
Posts: 5,603
|
![]() |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Axle Bearing | Electric Club Car | |||
busted bearing | Electric Club Car | |||
Top End Replacement | Gas EZGO | |||
Carb Jet Replacement | Gas EZGO | |||
G1 Shock replacement | Gas Yamaha |