23HP Big Block EZGO build MEGA Sale!

roady89 · 12-04-2010, 03:41 PM

EZGO Briggs Vanguard Big Block build. 23 Briggs with Cam and Rev kit from CPP. Stainless header. K&N filter installed. Wiring harness. Cranked 1 time. Does NOT include Clutch or muffler, however, I MIGHT can get you a deal on a clutch. Majority of these parts have never been installed on a cart. Still mounted on the shipping plywood.

If you want to hear it run thats not a problem, just let me know. Serious buyers only. (Just an FYI. First run I ran it long enough to run all the fuel out of the fuel bowl so as not to gum up the carb.)

Still has the spacer, bolt and keyway on the crank. Header is NOT "blued" from heat. Shaft has a little surface rust but thats normal.

Ezgo Engine cradle and Long Travel Rear. (still in plastic)

EZGO frame in primer. I had it sandblasted TWICE before prime, its pretty clean. If you would like it painted I can have it blasted and painted at additional cost $$$. Powder coating is also an option, money talks.

The body support has surface rust but can be primed easily.

AS long Travel front, Polished coil overs. (set of 4) There are other small brackets etc not shown. Also has the AS steering rack and pinion.

AS long travel comes with new steering column.

Rebuilt transaxle with 8:1 gear set. Axle tubes and axles. Governor removed internally(no outer bearings or clips. No brakes or drums. I do have a new set but they are not included. Money talks but you REALLY need a disk brake kit like Scottyb's or other.) Here is where I rebuilt the transaxle, you can see what I did there. http://www.buggiesgonewild.com/gas-e...html#post87820

It has some light surface rust, I can beadblast these tubes if needed.

$2600. for everything plus shipping cost if any. Edit: I do have access to freight carriers etc. I made arrangement to ship by freight carrier in case it needs shipping. I can package it all up on one of those long pallets. The frame is the longest part. PM me if needed..... I have a rivet kit somewhere, used white body and cowl and misc small parts like the throttle box (used) NEW complete bolt on brake shoe backing plate assemblies and new hubs somewhere. Can throw those in for a little more. I can take more pics if needed.....oh gawd this makes me sick.......hurry before I change my mind.

roady89 · 12-04-2010, 03:41 PM

More parts of the whole thing.....NEW EZGO Battery trays, roof support bolt kit.
Polished stainless seat back supports in the white plastic.

NEW Brake cables, shift cables and choke cable.

NEW Rear bumper, NEW armrests, floormat. (needs armor all or something but it is new)

New rear inner fenders.

Driven clutch. (never got around to rebuilding this) Also a NEW rear access panel wrapped in plastic upper right side.

All part of post 1 price.

AirJunky · 12-05-2010, 01:56 AM

Almost makes me wish I was closer to Texas. Something tells me there is more to this story than I have any clue about.

Good luck on the sale, Roady.

roady89 · 12-05-2010, 05:22 AM

Quote:

Originally Posted by AirJunky

Almost makes me wish I was closer to Texas. Something tells me there is more to this story than I have any clue about.

Good luck on the sale, Roady.

Thanks AJ. Shipping isn't out of the question, I have access to freight carriers and UPS, just trying to make it easier. Actually I had already made arrangements in case I needed to ship anything by UPS or freight carrier. Really all it would take would be a long pallet if someone wants the whole thing but I'm sure shipping via Freight carrier wouldn't be cheap......I dunno.....maybe $300-$500 I'm guessing. (I really don't know.) I "had" EVERYTHING at 1 time up until I used the new dash and floor pans, rockers and other misc parts on another build. Your right, I'm not selling cause I want too.....some things are more important is all.

roady89 · 12-07-2010, 08:23 AM

I made arrangement to ship by freight carrier in case it needs shipping. I can package it all up on one of those long pallets. The frame is the longest part.

cwayaustx · 12-07-2010, 09:05 AM

Roady, not sure who you got a quote from but freightcenter.com has done me pretty good and reasonable prices.

roady89 · 12-07-2010, 09:12 AM

Actually haven't got a QUOTE yet, just made sure I could ship the whole thing by freight truck. I'd have to weigh everything.

cwayaustx · 12-07-2010, 09:18 AM

1800-716-7608, x1013, Art in case you need a quote.

BLACK DEATH · 12-07-2010, 01:56 PM

Wanna sell just the engine?

roady89 · 12-07-2010, 02:00 PM

Quote:

Originally Posted by BLACK DEATH

Wanna sell just the engine?

Not at the moment. Time will tell though.

Ive got an Equus Tach that goes with everything.

12-04-2010, 03:41 PM	#1
roady89 nimda Join Date: Jun 2007 Posts: 13,022	23HP Big Block EZGO build MEGA Sale! EZGO Briggs Vanguard Big Block build. 23 Briggs with Cam and Rev kit from CPP. Stainless header. K&N filter installed. Wiring harness. Cranked 1 time. Does NOT include Clutch or muffler, however, I MIGHT can get you a deal on a clutch. Majority of these parts have never been installed on a cart. Still mounted on the shipping plywood. If you want to hear it run thats not a problem, just let me know. Serious buyers only. (Just an FYI. First run I ran it long enough to run all the fuel out of the fuel bowl so as not to gum up the carb.) Still has the spacer, bolt and keyway on the crank. Header is NOT "blued" from heat. Shaft has a little surface rust but thats normal. Ezgo Engine cradle and Long Travel Rear. (still in plastic) EZGO frame in primer. I had it sandblasted TWICE before prime, its pretty clean. If you would like it painted I can have it blasted and painted at additional cost $$$. Powder coating is also an option, money talks. The body support has surface rust but can be primed easily. AS long Travel front, Polished coil overs. (set of 4) There are other small brackets etc not shown. Also has the AS steering rack and pinion. AS long travel comes with new steering column. Rebuilt transaxle with 8:1 gear set. Axle tubes and axles. Governor removed internally(no outer bearings or clips. No brakes or drums. I do have a new set but they are not included. Money talks but you REALLY need a disk brake kit like Scottyb's or other.) Here is where I rebuilt the transaxle, you can see what I did there. http://www.buggiesgonewild.com/gas-e...html#post87820 It has some light surface rust, I can beadblast these tubes if needed. $2600. for everything plus shipping cost if any. Edit: I do have access to freight carriers etc. I made arrangement to ship by freight carrier in case it needs shipping. I can package it all up on one of those long pallets. The frame is the longest part. PM me if needed..... I have a rivet kit somewhere, used white body and cowl and misc small parts like the throttle box (used) NEW complete bolt on brake shoe backing plate assemblies and new hubs somewhere. Can throw those in for a little more. I can take more pics if needed.....oh gawd this makes me sick.......hurry before I change my mind.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

12-04-2010, 03:41 PM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: 23HP Big Block EZGO build MEGA Sale! More parts of the whole thing.....NEW EZGO Battery trays, roof support bolt kit. Polished stainless seat back supports in the white plastic. NEW Brake cables, shift cables and choke cable. NEW Rear bumper, NEW armrests, floormat. (needs armor all or something but it is new) New rear inner fenders. Driven clutch. (never got around to rebuilding this) Also a NEW rear access panel wrapped in plastic upper right side. All part of post 1 price.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

12-05-2010, 01:56 AM	#3
AirJunky Gone Wild Join Date: Jul 2009 Location: Liberty Lake, WA. Posts: 1,762	Re: 23HP Big Block EZGO build MEGA Sale! Almost makes me wish I was closer to Texas. Something tells me there is more to this story than I have any clue about. Good luck on the sale, Roady.

12-07-2010, 08:23 AM	#5
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: 23HP Big Block EZGO build MEGA Sale! I made arrangement to ship by freight carrier in case it needs shipping. I can package it all up on one of those long pallets. The frame is the longest part.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

12-07-2010, 09:05 AM	#6
cwayaustx Gone Wild Join Date: May 2008 Posts: 772	Re: 23HP Big Block EZGO build MEGA Sale! Roady, not sure who you got a quote from but freightcenter.com has done me pretty good and reasonable prices.
cwayaustx Gone Wild Join Date: May 2008 Posts: 772

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-07-2010, 09:12 AM	#7
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: 23HP Big Block EZGO build MEGA Sale! Actually haven't got a QUOTE yet, just made sure I could ship the whole thing by freight truck. I'd have to weigh everything.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

12-07-2010, 09:18 AM	#8
cwayaustx Gone Wild Join Date: May 2008 Posts: 772	Re: 23HP Big Block EZGO build MEGA Sale! 1800-716-7608, x1013, Art in case you need a quote.
cwayaustx Gone Wild Join Date: May 2008 Posts: 772

12-07-2010, 01:56 PM	#9
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: 23HP Big Block EZGO build MEGA Sale! Wanna sell just the engine?

Similar Threads
Thread	Forum
35hp carb on build 23hp vanny	Big Block Talk!
Lifted EZGO Big Block for Sale!	Golf Carts and Parts
first time big block build Q@A	Big Block Talk!
Big Block EZGO ST Sport for sale	Golf Carts and Parts
Big Block build	Big Block Talk!