lights not working
I have a 90 ezgo gas and the lights were working and they suddenly stopped. I found two fuses in the engine compartment and they are fine. I took the light switch out and connected the wires and still no lights.. I am not sure what to check next. it looks like the lights are grounded to the frame. thanks for your help
|
Re: lights not working
Have you tried replacing the bulbs? Check your grounds. Check to see if you have voltage at the bulb socket and work back from there.
|
Re: lights not working
check that ground to the chassis very closely, that is a common spot for circuits to lose connection
take off the bolt or screw, whatever is the end of the ground wire and clean it up and make sure its grounded actually to the metal, not just to the paint |
Re: lights not working
I ended up attaching the positive wire to the ignition wire and it works fine now, the grounds and bulbs were ok. I am not sure if I need a fuse though?? thanks for the help. I can see now:)
|
Re: lights not working
fuse: YES
|
All times are GMT -5. The time now is 02:19 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.